Find a product
- en
- Find a product
- Machinery and electrical equipment and parts thereof
- Rotary-system three-side seal pouch packaging machines, Series K
Rotary-system three-side seal pouch packaging machines, Series K
Three-side seal pouch packaging machines series K. It uses a seal bar type heat seal method to wrap bulky fillings more neatly.
Product Information
Concept
- Servo motor control is used for film pitch feed. You can easily match the print pattern and change the bag length with the touch panel.
- A uniform sealing pressure can be obtained by adopting an independent mechanism. Compared to the thermal roll method, the sealing time is longer and a stronger seal is achieved.
- Highly accurate seals are applied to the left and right seal bars. A clean seal that does not easily wrinkle has been achieved. (Patented)
- Low-cost machine with a simple mechanism
- Covers are used for areas where there is a risk of burns or pinching. Safety measures are taken to stop the machine when these covers are opened.
Application
- Powdered soup, drip coffee, granulated sugar, tea, instant coffee, dried vegetables, dried seaweed, tea-pickled seaweed, sprinkle, powder / granule medicine, health food, tablets, rounds, capsules, other bathing agents, desiccants, and so on
Product uniqueness
Achieves a clean seal that does not easily wrinkle (patented)
Minimum order quantity
One unit
Specification
| Small bag machine | Large bag machine | |
| Model | Model K-340 | Model M-340 |
| Filling capacity*1 | 0.5-30cc | 30-150cc |
| Packaging speed*1 | Per minute 20-120 pouches | Per minute 20-80 pouches |
| Pouch size*1*3 | Width: 30-100mm Length: 30-130mm |
Width: 30-120mm Length: 30-180mm |
| Machine dimensions | 695(W)×730(D)×1,700(H)mm | 695(W)×730(D)×2,070(H)mm |
| Machine weight | Approx 300kg | Approx 350kg |
| Power consumption | Approx 2kw | |
| Compressed air consumption*2 | Approx 0.5Mpa・70L/min(ANR) | |
| Power supply | 200V, 3-phase, 50/60H | |
| Standard equipment |
Heater disconnection detector Pre-heat bar open detector
Mark alignment photocell device Film tension device Film end detector Multiple perforation cutter I notch cutting device
Safety cover with stop function
Rotary cutter device Shoot part tapping device Touch panel Stainless cover |
|
| Optional devices |
Seam tape detector
Horizontal seal part bite detection device Empty bag detector Seal pressure detector Intermediate shutter device Dust collector Dust collection timing valve device Static eliminator Exoplanet discharge device Printer Print inspection device Nitrogen gas flushing device Multiple perforation cutter I notch cutting device Jagged blade cutter Special shape cutter device Hopper level detector Variable capacity turntable
Various filling equipment
Collective turntable device Bucket conveyor device Belt conveyor Sub turntable device Vibration feeding system Stacker Petit scale Auger filler Tablet and pill counter Counting device Counting dividing device Weight checker Touch panel Measures for validation Overseas special specifications (compliance with UL and CE) |
|
*Machines can be manufactured to specifications other than those described above.
*1 The numerical values vary depending on the fill, packaging materials, and pouch dimensions.
*2 The value for the air consumption is obtained without optional devices.
*3 The width can be changed by replacing the film guide, and the length can be changed by the servo motor.
