eeJAPAN

Find a product

Rotary-system three-side/four-side seal pouch packaging machines, Series RF

  • Rotary-system three-side/four-side seal pouch packaging machines, Series RF
  • Rotary-system three-side/four-side seal pouch packaging machines, Series RF

The pouch packaging machine body and the various later-process machines are designed as units. We recommend a new packaging line system that combines different units freely to suit the application. Series RF products, developed as new models in the series R products, are designed on the basis of this concept to allow flexible combination with later-process units.

Company Profile

Preferred countries

All countries

See other products

Product Information

Concept

  • Industry-leading throughput of 200-1000 bags per minute
  • Shoot mounting variations for various industries
  • Suitable for various materials with reliable sealing by long heat treatment and long filling time
  •                                
  • It can be linked with peripheral devices as a packaging plant solution
  •                                
  • A wide range of post-process options are available

Application

  • Powdered soup stocks, powdered soups, seasoning, noodle ingredients, granulated sugar, instant coffee, powdered cream, tea packs (teapots), health foods, powdered beverage bases, drip coffee, powdered and granular medicines, drying agents, oxygen absorber, food additives, bath salts, capsules, pills, and so on

Product uniqueness

Designed for flexible combination of packaging machine body and various post-process equipments

Minimum order quantity

One unit

Specification

Model Model RF-35C
Model RF-35G
Model RF-36C
Model RF-36G
Model RF-51C
Model RF-51G
Model RF-52C
Model RF-52G
Model RF-58C
Model RF-58G
Model RF-66 Model RF-86 Model RF-100
Mark
registration
control
None Attached None Attached
Attached
Attached Attached None
Filling
capacity*1
0.5 – 20cc 0.5 – 50cc
0.5cc – 30cc
0.5 – 50cc
Packaging
speed*1
Per minute 200 – 400 pouches (maximum film speed of 28 m/min) Per minute 200 – 800 pouches (maximum film speed of 42 m/min)
Per minute 350 – 800 pouches(
maximum film speed of
46m/min)
Per minute 400 – 800 pouches (maximum film speed of 55 m/min) Per minute 500 – 900 pouches (maximum film speed of 63 m/min) Per minute 600 – 1000 pouches (maximum film speed of 70 m/min)
Pouch size*1 Length: 40 – 85 mm (inner specified dimension)
Width: 30 – 90 mm(with replacing film forming pipe)
Length: 40 – 125 mm (inner specified dimension)
Width: 30 – 110 mm(with replacing film forming pipe)
Length: 40 – 130 mm (inner specified dimension)
Width: 30 – 110 mm (with replacing film forming pipe)
Machine
dimensions
Approx1,600(W)
×Approx870(D)
×Approx2,010(H)mm
Approx
1,900(W)
×
Approx950
(D)
×
Approx
2,100(H)
mm
Approx2,000
(W)×
Approx1,200
(D)×
Approx2,010
(H)mm
Approx2,400
(W)×
Approx1,400
(D)×
Approx2,010
(H)mm
Approx2,600
(W)×
Approx1,500
(D)×
Approx2,010
(H)mm
Machine
weight
Approx1,500kg Approx2,000kg
Approx
2,000kg
Approx
3,000kg
Approx
3,500kg
Approx
4,000kg
Power
consumption
Approx6 – 8kw Approx6 – 10kw
Approx
8kw
Approx
8 – 10kw
Approx
10 – 12kw
Approx
10 – 12kw
Compressed
air
consumption
*2
Approx0.5MPa・100L/min(ANR)
Power supply 200 VAC, 3-phase, 50/60 H
Standard
equipment
Automatic film splicer
Film end detector
Hopper level detector
Film reel air shaft
Joint tape detector
Vertical seal temperature controller (representative detection)
Filling chute knocker
Heater disconnection detector Pre-heat bar open detector
Pre-heat bar automatic open/close device
Rotary cutter (for type G only)
Empty pouch detector
NG pouch rejection discharger
Overload detector
Safety cover with inter lock
Touch panel
Stainless cover
Optional
devices
Seal stacking detector
Pre heather clearance detector
Seal pressure detector
Turntable scraper contact detector
Middle filling chute device
Dust collector
Static electricity remover
Film tensioner
Film vent hole processor (punching roll type)
Four-sided seal unit
Telescopic type dosing cup
Filling chute detach device
Printer
Print inspection device
Emboss on seal part
Nitrogen gas flushing device
Cut position automatic controller
Multiple perforation cutter I notch cutting device
Special shape cutter
Blending filler
Group turntable
Bucket conveyor
Auxiliary turntable
Vibration feeding system
Super scale
Auger filler
Tablet and pill counter
Belt conveyor
Counting device
Counting dividing device
Stacker
Weight checker
Measurement deviation feedback control
Central lubrication device
Measures for validation
Overseas special specifications (compliance with UL and CE)

*Machines can be manufactured to specifications other than those described above.

*Type G machines, the standard specification models RF-35, 36, 51, and 52, are equipped with a cutter. Type C machines are not equipped with a cutter. Types C and G machines come standard with a gear drive; however, machines with servo-motor drive specifications can be manufactured. (Models RF-35, 36, 51, and 52 with no symbol for the model designation)

*Models RF-66, 88, and 100 are not equipped with a cutter. When a cutter is needed, a cutter unit is connected as a later-process unit.

*1 The numerical values vary depending on the fill, packaging materials, and pouch dimensions.

*2 The value for the air consumption is obtained without optional devices.

Other products